My Junk At The Track....

[Wheezy]

This is the first video I've edited but I thought it came out decent....

Need an anti-roll bar pretty bad!

http://www.youtube.com/watch?v=KDiZt81ysoc

[White90GT]

Hey, you need an ARB, I have an ARB LOL. $140 come and get it and just make you some tabs for the rear end.

Looks like you got it running good now, you ready to line em up motor on motor??

[Wheezy]

Hey, you need an ARB, I have an ARB LOL. $140 come and get it and just make you some tabs for the rear end.

Looks like you got it running good now, you ready to line em up motor on motor??

Yeah, it's coming along...I think an ARB will shave more time off my 60'. I had my converter restalled and they overshot by about 1000 RPM's. On the brake it goes to 5200 RPM, and that was what I was leaving at. Probably gonna use the 2 step and play around with the launching RPM's to see if I can pick anything up.

I'll buy the ARB from you this weekend.

We can run'em....

John

[White90GT]

Yeah, it's coming along...I think an ARB will shave more time off my 60'. I had my converter restalled and they overshot by about 1000 RPM's. On the brake it goes to 5200 RPM, and that was what I was leaving at. Probably gonna use the 2 step and play around with the launching RPM's to see if I can pick anything up.

I'll buy the ARB from you this weekend.

We can run'em....

John

5200 is actually probably pretty good unless you intend to spray it.
My converter is 4400 and IMO is a little tight for n/a performance, but I think it would stand up to a 150-200 hit if I ever spray it. Got several buddies with similar motor combos that have a converter that loose and they are out sixty footing me on both footbrake and transbrake. I could probably pick up another .1 in the 1/8 with a looser converter. But I did go 1.45 in the heat a couple weeks ago.

[95badbird]

rolls out nice!

[camaro_zzzz]

Damn it won't let me watch it from my black berry....

[Wheezy]

5200 is actually probably pretty good unless you intend to spray it.
My converter is 4400 and IMO is a little tight for n/a performance, but I think it would stand up to a 150-200 hit if I ever spray it. Got several buddies with similar motor combos that have a converter that loose and they are out sixty footing me on both footbrake and transbrake. I could probably pick up another .1 in the 1/8 with a looser converter. But I did go 1.45 in the heat a couple weeks ago.

Yeah, I plan on spraying in the future....Not a big shot, but in the 150-200 range.

[Bad Chad]

Looks good, I've been thinking about building another car.

[Mustang Silly]

Nice Run.....

[GLASSMAN CHAD]

Yeah, I plan on spraying in the future....Not a big shot, but in the 150-200 range.

My motor converter stalls at 5400.150 shot its fine.When i spray a 175 it blows throu.But that was at 3250 pounds.It also depends on your weight.

[82ChebySWB]

NICE....car looks and sounds great!

[ZONES89RS]

Love seeing the fox bodys with more than 306 cubes:)

[SlvrS197]

Nice run man!! rolls out nice

[Forged88]

Very nice bro! im stick but thinking bout going auto. Should i? im going to be runing a 327 with a ysi(12-18lbs, blow thru) and MAYBE...a 200 shot from a fogger.

[deez nutz]

Love seeing the fox bodys with more than 306 cubes:)

Most "306"s are no where near that lol

[White90GT]

Love seeing the fox bodys with more than 306 cubes:)


Haha, all foxes are 306 cubes LOL. Even this one is a 306. Its a custom long rod 306 with a custom 3" crank instead of 3.5 for the windsor.

[308STEEL]

Haha, all foxes are 306 cubes LOL. Even this one is a 306. Its a custom long rod 306 with a custom 3" crank instead of 3.5 for the windsor.

LOL +1

[Mustang Silly]

302 w/E7's 4 tha win, ha

i jus need too build me a 306 now

[Wheezy]

It's ok...Mines just a street car.

All joking aside, I plan on driving it to the meet when it cools down a bit.

Two front seats, all lights, power windows and locks and a pump gas motor that'll still bust some ass on the skreet...